BAZHOU QISHANG CASTOR CO., LTD
Booth No.: W2.161
Product Groups:
2.3.1 Ramps and ramp equipment2.3.2 Loading and unloading equipment3.1.2 Vans and delivery trucks
Target Groups:
Automotive & PartsImport and Export TraderElectric Appliance
Logistical Economic Areas
AsiaEuropeMiddle East and India
Products
单簧减震脚轮
减震轮结构设计合理,选用优异的耐冲击抗震弹簧,避免轮子在凹凸地面上工作时因受震动而损坏。采用高科技聚氨酯包铁芯轮,具有防污、抗油、耐磨及高承载的特点,轮子采用密封防潮绕,极具良好的防尘和防潮绕性,以适宜不同环境的选择和要求。
双簧减震脚轮
减震轮结构设计合理,选用优异的耐冲击抗震弹簧,避免轮子在凹凸地面上工作时因受震动而损坏。采用高科技聚氨酯包铁芯轮,具有防污、抗油、耐磨及高承载的特点,轮子采用密封防潮绕,极具良好的防尘和防潮绕性,以适宜不同环境的选择和要求。
工业黑色聚氨酯PU轮
支架采用碱槽挂镀工艺,确保72小时盐雾试验,采用φ18加大铆钉,TPU轮的特性,TPU轮的弹性体具备耐磨耗、耐化学侵蚀、高强度、高弹性、耐低压、吸震性强、耐撕裂,耐耐辐射,高承载和减震冲等良好性能。TPU同时具备较宽的硬度范围,
- The content of this System has been provided by the exhibitors and Messe Muenchen Shanghai Co., Ltd. (hereinafter referred to as “MM-SH”) will not assume any liability for the correctness, completeness and up-to-date status of the content.
- This System includes links to external websites of third parties, MM-SH have no influence on the contents of these websites. In all cases, the respective site provider or operator shall be responsible for the content of the sites linked. MM-SH do not bear any legal liability therefrom.
- In particular, MM-SH reserves the right to make changes or extensions to the information provided without prior notification. Decisions based on the information provided on or via this System are for your own account and risk. MM-SH shall not be liable for any direct or indirect damages caused by use of information provided on or via this System.
- MM-SH do not bear any legal liability for any loss arising from any direct or indirect use of contents of this System, including without limitation the losses resulted from error, omission or virus, etc.
- The information, photos, and logos, etc. in relation to the exhibitors in this System are all provided by exhibitors and any download or use of the content for commercial purpose without authorization is prohibited. If you have any objection, please contact MM-SH.